Building on the reputation the brand has built for reliability, affordability and simplicity through its previous LED video products, ADJ's new range offers a versatile modular system packed with advanced level features.

The new ‘VS’ Vision Series of LED video panels offers a versatile modular solution that has been developed to make life easier for video professionals installing LED walls on either a temporary or permanent basis.

Each panel in the range features four individual modules, which are front serviceable, making it ideal for temporary hanging as well as permanent installation. Across the range, the modules are all mounted to the same frame, allowing panels of different resolutions to be used together and meaning that the same rigging bar and other accessories can be used for all VS models.

Featuring the highest quality LED binning as well as bright, clear output, the VS Series features three panel models. The VS5 offers a 5.95mm pixel pitch (84 x 84 pixel density), the VS3 has a 3.91mm pixel pitch (128 x 128 pixel density) and the VS2 offers the highest resolution in the range with a 2.97mm pixel pitch (168 x 168 pixel density).

All three panels utilize 3-in-1 RGB SMD2121 LEDs with a brightness of 1000 NITS and a very high refresh rate of 3840Hz. They offer a wide viewing angle of 160° (horizontal) / 140° (vertical) and a high contrast ratio of 5000:1, allowing for the delivery of exceptionally vibrant video reproduction.

Every panel in the range is equipped with a high-quality Novastar A5s data receiving card and features DataLock securely-locking ethernet input and output sockets that allow the signal from a compatible video processor (for example the Novastar MCRTL-300, VX4S or Nova Pro HD) to be linked from panel to panel.

ADJ VisionSeries 2

All of the panels feature in-built articulated protectors which fold out from the back of the unit to provide protection to the corners – the parts of the panels most prone to damage – during transit. In addition, each panel also features a convenient recessed carry handle built-in to its top edge. This makes the compact (19.68” x 19.68” x 2.75” / 500mm x 500mm x 69.6mm) and lightweight (17 lbs. / 7.7kg.) panels extremely easy to carry and rig.

Rigging of the panels is made even easier by the Vision Series’ innovative magnetic locating system. This pulls together the top of one panel to the bottom of another, allowing a technician to hold the new panel temporarily in place with just one hand while using their other hand to engage the pin-locking mechanism. This means that a single crew member can quickly and easily a erect a full wall of panels.

The VS Series is completed by a range of accessories that can all be used interchangeably with any of the panels in the range. The VSRB1 is an intelligently-designed rigging bar that can be used to vertically hang or ground stack up to 20 VS panels. The VSRQR is a convenient ‘quick rig’ attachment that fits to the rear of any Vision Series panel so that it can be fastened directly to a 2” pipe or truss.

The VSSCSB is a support base that allows up to three VS panels to be mounted in a freestanding column, ideal for temporary digital signage applications. The VSMRT is a module removal tool that magnetically attaches to the front of Vision Series panels to aid technicians in removing modules from the front side when servicing.

ADJ VisionSeries 1

A dedicated flight case, the VSFC8, has also been created specifically for protecting and transporting up to eight Vision Series LED panels. The robust wheeled road trunk features eight padded slots for the panels, a hinged lid that locks in place using two butterfly catches, a rubber bumper strip that runs around all four sides of the case, and two recessed bar handles on either end.

It also features a useful clear plastic window that runs down one side, allowing users to easily identify how many panels are stored in a case without opening the lid. This also allows crew members to check which way the panels are facing if the case needs to be flipped on its end, so that they can ensure the LEDs are facing upwards.

The Vision Series VS2 and VS3 panels are shipping now from ADJ USA, while the VS5 will be available next month. The whole series is also due to begin shipping from ADJ Europe next month.